Linksys Smart Wi-fi | Linksys Router Setup

Linksys {linksys smart wi-fi}has some of the best networking hardware such as routers, IP cameras and extenders. They provide some of the finest routers with numerous advanced features that the user can implement for better security and a smooth user experience. To gain access to the advanced features, the user will have to login to the Linksys router using web domain. After logging in to the router, the user can customize, configure, control, monitor and even repair their network themselves. To initially login to the router, the admin login page asks the user for the default information regarding the router. The default credentials for most of the Linksys routers is “admin” for the username and password. The default username and password are case sensitive.

The troubleshooting steps can also be applied on the following Linksys router models:

Linksys smart wi-fi WRT1200AC AC1200 Dual-Band Wi-Fi Router

Linksys smart wifi WRT1900AC AC1900 Dual-Band Wi-Fi Router

Linksys smart wi-fiWRT32X AC3200 Dual-Band Wi-Fi Gaming Router

Linksys WRT3200ACM AC3200 MU-MIMO Gigabit Wi-Fi Router

Linksys WRT1900ACS Dual-Band Wi-Fi Router

Linksys EA8300 Max-Stream AC2200 Tri-Band Wi-Fi Router

Linksys EA9300 Max-Stream AC4000 Tri-Band Wi-Fi Router

Linksys EA7500 Max-Stream AC1900 MU-MIMO Gigabit Wi-Fi Router

Linksys EA8500 Max-Stream AC2600 MU-MIMO Smart Wi-Fi Router

Linksys EA9200 AC3200 Tri-Band Wi-Fi Router

Here are the troubleshooting steps to setup and login to the Linksys routers:

  • Connect the desktop computer or laptop to any of the internet ports of the router using an Ethernet cable.

  • Now, connect the modem to the WAN port of the router using another Ethernet cable.

  • Turn off all the devices and then turn them all on after a couple of minutes. Wait for the devices to finish booting up.

  • Open any internet browser on the same device that is connected to the network. Type in the address bar and press enter.

  • The admin page for the router will display prompting the user for the username and password for the router. The default username and password are provided at the bottom of the router. The username and password are sensitive.

  • Once the user has successfully logged in to the router, the Quick Setup will appear. The Quick Setup will guide the user through the rest of the setup process using very simple on screen instructions.

Now, the Linksys router will have been successfully setup and ready to install. From here, the user can configure their network as they desire using the simple web based interface of the router.

Troubleshooting steps to reset the Linksys router

The router can be reset if the user either forgets or loses the information of the router. Take note that if the user chooses to reset the router, their personalized settings will get reset too. Here are the steps to reset the Linksys router:

  • Locate the Reset button at the back of the router. It might be labeled as Reset or Restore Factory Default Settings. The option may vary for different router models.

  • Using a small pin or something similar, press and hold the reset button for about ten seconds.

  • After holding the reset button for ten seconds, release the button. The LED lights at the front of the router will start blinking. Once the power light becomes stable, the router will have reset.



  • Do not reset the router again and again. It might corrupt the firmware of the router.

  • Do not unplug the router from its power source during the update.

Troubleshooting steps to update the firmware for the Linksys routers:

  • Open the Linksys Support Site on an internet browser and download the latest firmware for the appropriate Linksys router. Make sure that the firmware version is the latest and compatible with the router.

  • Open an internet browser on the device that is connected to the Linksys router via an Ethernet cable.

  • Type in the address bar and press enter. The Linksys router’s admin login page will then display prompting the user for the default credentials regarding the router.

  • The default username is either left blank or “admin” and the default password is “password” for most of the Linksys routers.

  • Once successfully entered the web based interface for the router, the user has to click ADVANCED option.

  • There, click the Administration option. Go to the Router Update or Firmware Update option. The label may vary for different router models.

  • Click the Browse option to search and locate the previously downloaded file.

  • Click the Upload option to begin the firmware update process.

  • The firmware update usually takes a couple of minutes of the user’s time.

Once the router has updated the firmware, reboot the router to implement the changes made. After that, the user can start using their router as they desire.

Linksys Firmware up

Take Note:

  • Do not download the firmware from any third party websites.

  • Do not interrupt the firmware update process anyhow or unplug the router from its power source as it can corrupt the router and may even render the router useless.

Troubleshooting steps to change the username and password for the Linksys routers:

  • Open the router’s admin login page using and enter the default credentials to login to the router and access the web based interface.

  • Once logged in successfully, the user will see the Administration option. Click on it.

  • Now, click the Management option. Under the Management option, the user will see the username and password option.

  • The user can enter the new desired information within the Network Name (SSID) option and the Network Key (passphrase) option. The fields will be provided below the respective options.

  • Once the user has entered the new information, click Save to save the settings made.

Now, the username and password for the Linksys router will have been changed. The user can now connect their devices using the new credentials for the router.

 Setup Linksys router through

 Web domain of these routers is utilized to gain access to the login as well as the configuration process of the routers. will take you directly to the admin page of the Linksys routers. Many people face with the problem of not getting to the admin page as they can’t be able to locate their IP address. The negligence of this situation was paid in not getting up to even the admin page. provides you the convenience to directly get you into the admin webpage. After getting on the admin page you have to fill up all the credentials, the page is asking for. This page provides you the facility to get into the setup and login page which helps you to configure your Linksys router and get your router working in proper condition. Now, Linksys has also provided the facility of pre-configuring the router so that you can easily access the internet without any hassle.

 Prerequisites required for the setup of the Linksys router are-

  1. Desktop or laptop in which you have to operate your internet.
  2. Ethernet cable for connection between the router and other various devices
  3. A proper source of connection

Setup of the Linksys router Via

Set up of the Linksys routers is an essential method for accessing as well as configuring the routers. Setup is required in all types of router no matter what type of router you are working on. The step which will help you in accessing the setup of your Linksys router

After connecting all cables in modem, router as well as to the desktop, you have to run a web page by typing on the address bar

After typing above link you will enter into the webpage of the setup where you have to fill up the login credentials, For smart routers, the web page may appear differently but that will merely be an issue.

Login credential is attributed with the username as well as password where you have to fill admin in both the bars which are inbuilt username and password embedded by the organization. Perform your keystrokes carefully as they are case sensitive

The user can easily login to the router and configure it. There will be no hassle in it and you can even customize your network setting after logging into your router

Linksys firmware update (Linksys smart Wi-Fi router)

All routers have Firmware; perhaps not the only router but all kinds of communicating device contain this software. Up gradation of Firmware will do no good in the range of your router but surely it will have an impact of good performance on your router.

Here are some steps which help you out in up gradation of the router

  • Locate the model number of your Linksys router which will probably be on the back of your router. It will just by the side of the version number of your router.
  • . Then, install Linksys Router Firmware by entering the model number and choosing the version number of your router on the Support site.
  •  Before the process of upgrade begins, take the backup of the current Linksys Configuration.
  • Then, go to the login page by typing on the link bar of your browser.
  • As soon as you enter the login page. Go to Administration>Configuration management> Backup> Config.bin, Then save this file to any  location on your local device
  • Now, From the web interface, go the Administration then Firmware Upgrade Then finally choose the latest file that has downloaded above and click on upgrade
  • Let the firmware upgrade, do not click any link on the web interface page until or unless the up gradation is not completed.
  • Once the installation of the upgrade version is completed, make sure the firmware is there with its upgraded version.

Linksys extenders (extender.linksys setup)

Sometimes the range is not high enough for the router to access the speed which it should access at its best. The range is not the only issue but precisely there are various standard reasons of not acquiring the speed and some are concrete walls, different floors, interference of others signals, excess distance and various common reasons acting as degradation in speed of your router. This issue not only degrades the speed of your internet but also manages in slowing down the performance of your Linksys router.

People throughout the world face this kind of problem which is really a prominent one. A rational person who is a victim of this problem will obviously not look around for purchasing the new router with its enhanced range. He will be smart enough to not to again spend his money on purchasing another smart router. Now, there comes the role of Linksys extender which not only enhances the range of your router but also plays its significant role in improving the performance of your router.

A router extender is sometimes known as range expander. It is a sort of wireless repeater used in expanding the reach of a wireless LAN. Linksys extender is fixed between the Linksys router and a user that is not close to receive the enough speed for the best performance of the router. It does not only provides the extra coverage but also avoid the barriers whether they are the concrete walls or different floors, it will facilitate you with its best speed that your router can provide you

Some important considerations of the Linksys extenders

  • In order to get the maximum speed, there are some considerations that you must follow. These considerations will surely help you out on gaining the tremendous speed of your Linksys
  • The range expander must be in enough range of both the network resource as the Linksys router of the user to gain the maximum speed of your router.
  • It has a static IP address so,  it is not identified as the client so, do best to avoid it.
  • The signal transmitted by your Linksys router will be the same as the signal providing by the network source.
  • Make sure your Linksys extender should be fixed just or before the barrier to make it a close range between the source and your Linksys router
  • In order to get the best speed, the Linksys extender should be using the same software and chipsets as the base router
  • The range extender will need the associated encryption keys in case the signal is encrypted.

How to reset the password Linksys extender

Linksys extender sometime gets corrupted of various signals, sometimes it may become the need of resetting it. It is not the messed up process.

You just have to follow these steps in resetting the Linksys router

  • Open any webpage and type in the URL bar. You can also type the default IP address of your Linksys extender
  •  Enter the customized password, in case you have previously personalized it. You can type the default password just in case you haven’t customized it
  • .After logging into the webpage of an extender. Go through Administration> Management.
  •  Enter the maintained password  and then desired one which you want to have and confirm it
  • Click save to save the submitted settings

Now you can access your Linksys extender anytime by entering the password which the new password you set for it.

Take Note:

  • Do not share the password with everyone.

  • Do not enter any password hints within the username as the nearby devices can still see the username of the router.